Precautions for stamping parts processing process（Sheet bending、sheet metal press）:
1. Semi-automatic and manual punching machines must be equipped with a two-hand brake switch, and it is strictly forbidden to pedal or start the switch punching with one hand. （stainless steel stamping）
2. After the high-strength punching machine is adjusted, after normal punching, close the soundproof box. （metal stamping）
3. During continuous punching, employees cannot take products by hand within 1M of the punching machine. （nickel stamping）
4. When the technician is on the mold adjustment machine, only one person can do the adjustment, not two people to do the adjustment. （precision stamping）
5. The technician can adjust the machine and feed the material, only outside the machine, and the distance is not less than 1M. （sheet metal tool）
6. Be sure to lock the screws when setting up the formwork, and stop the machine for 4 hours to check whether the screws are loose. （sheet metal stamping pressing）
7. When the mold has a problem during the production process and does not need to be unloaded, and it is directly repaired on the machine tool, the power supply of the injection molding machine must be turned off and the repairing sign is hung on the power box before the mold can be repaired. （metal stamping parts）
8. All the tools should be returned to the tool box after use, and should not be placed on the machine table, so as to prevent the tools from slipping and hurting people. （product customization）
9. When the machine is not in production, cut off the power supply in time. （hardware parts）
10. For short and small workpieces, use special tools, and do not directly feed or pick up the workpieces by hand. （OEM manufacturing services.）
11. The producer should stand properly, keep a certain distance between the hands and the head and the press, and always pay attention to the movement of the press, and it is strictly forbidden to chat with others. （OEM factory）
12. Operators and mold repairers are strictly prohibited from putting their hands into the mold during production. （non-standard customized parts）
13. When the operator is installing the suction fan, it is strictly forbidden to reach out to the motor to clean up waste . （Precise Custom Metal Stamping Parts）
14. It is strictly forbidden to wear slippers when going to work, so as not to hit the feet with molds and iron blocks in the workshop. Squad leaders, fitters, and mold repairers must wear safety shoes when they go to work; （boutique flat washer）
15. Male operators are strictly prohibited from wearing long hair, and female operators have to coil their long hair to prevent it from getting caught in the flywheel. ( Metal gasket)
16. White electric oil, alcohol, cleaning agent and other oils should pay attention to fire prevention. （Sheet Metal Parts and Components）
17. Materials, scraps and molds should be packed with gloves to avoid scratching hands.
18. When there is oil, it must be cleaned up in time to avoid slipping and wrestling.
19. It is strictly forbidden to wear gloves when drilling and milling machines; wear masks and eye protection when using grinders to protect yourself.
20. Pay attention to dragging the mold to prevent it from falling on the ground (the flatbed must be lowered to transport the mold).
21. It is strictly forbidden for non-electrician personnel to connect electricity and maintain the machine. ( Door and window hinge)
22. It is strictly forbidden to point the wind gun at people and blow it, it is easy to hurt the eyes. （Various stamping parts are customized）
23. The operator should wear earplugs. (laser making)
24. When the machine is found to be abnormal, first turn off the power and then find the technician on duty to deal with it in time, and cannot deal with it without authorization. (laser cutting)
25. When a new employee goes to work on the first day, the team leader must explain the safety operation rules to him, and learn the safety operation rules every day in the first week. (hood hinge)
26. When adjusting the machine, be sure to adjust the machine to single action, and it is strictly forbidden to open the joint discharge belt. （hardware parts）
27. No flammable or explosive items can be stored under the switch. (mounting plate)
28. Operators are strictly prohibited from chasing and beating in the workshop, so as not to wrestle, knock over products or hurt themselves. (actuator heat shield)
29. Carry out equipment inspection according to the inspection content on the equipment spot inspection card, pay special attention to whether the guide and brake device of the punch press are running normally, and the functions of single punching and continuous punching are distinct. (iron plate)
30. When installing the mold on the small punch (10T), first loosen the locking device of the guide rail, install the upper and lower molds, and then adjust the stroke of the guide rail until it meets the requirements and lock the fastening device. Hit to the single-stroke stroke, after locking the upper mold, the lower mold is locked after hydraulic clamping.(steel stamping parts)
Post time: Nov-24-2022