Button character sheet Stainless steel hairline button character sheet

1. Preparation: Prepare the required stainless steel materials and related equipment, such as wire drawing machines, grinding machines and polishing machines. At the same time, check the stainless steel workpiece to ensure that there is no obvious dirt, grease or defects on the surface, and prepare safety equipment such as goggles, gloves and breathing masks to ensure safe operation.
2. Degreasing, decontamination and rust removal: Use solvents or acidic cleaning agents to clean the oil, stains and scale on the surface of stainless steel to ensure that the surface is clean and free of impurities.
3. Rough grinding: Use grinding wheels or sandpaper for rough grinding to remove surface roughness and impurities. Select the appropriate grinding wheel or sandpaper grit size and gradually proceed from coarse to fine according to the work requirements, with the aim of removing deep scratches and unevenness.
4. Medium grinding: Use finer grinding wheels or sandpaper to continue grinding to further flatten the surface and remove the marks left by rough grinding. Ensure that grinding is performed evenly along the stainless steel surface to avoid local unevenness.
5. Wire drawing: Use tools such as brushes, sanding belts or mechanical wire drawing machines to wire draw the stainless steel surface. Depending on the desired drawing effect, different drawing tools and methods can be selected, such as horizontal drawing or vertical drawing.
6. Polishing: Use a polishing machine and polishing materials to polish the stainless steel surface to further improve the brightness and finish of the surface. According to needs, different polishing materials, such as polishing cloth wheels, polishing pastes, etc., can be selected to obtain the desired mirror effect.
7. Cleaning and drying: Clean the stainless steel products after wire drawing to remove dust and residues generated by grinding and polishing of the grinding wheel. Then dry the product to ensure that there is no water on the surface.

After completing the above steps, the stainless steel wire drawing process is basically completed. The specific process will be adjusted according to the different materials, product requirements and equipment conditions. In actual operation, the process parameters and steps will be flexibly adjusted according to the specific situation to obtain the best stainless steel wire drawing effect.